Written by Stephen Day
Gas Safe Engineer
Updated: 2nd December, 2025
Most homes need some radiators upgraded for a heat pump, but usually not all of them.
See how much you could save with a heat pump quote.
Heat pumps use a different heating approach compared to gas boilers.
Boilers heat water to high flow temperatures, usually between 60 and 80°C.
Heat pumps run at lower temperatures, often around 40 to 55°C.
This lower flow temperature is efficient and helps keep running costs predictable.
Some homes also consider high temperature systems, and our guide to high temperature heat pumps explains how they work at warmer flow temperatures.
A heat pump gathers heat from the air outside and concentrates it into your home.
Because it does this gradually, it works best when the heating system runs steadily at a lower temperature rather than switching on and off at high heat.
Lower flow temperatures mean radiators must release heat over a larger surface area to keep rooms warm.
A radiator that is too small may struggle to reach the room temperature you expect, especially on colder days.
Most homes do not need every radiator replaced, but many need one or two key rooms upgrading.
This depends on insulation, room size and the condition of your current radiators.
Older homes with larger rooms
Homes with thin internal walls or older insulation
Homes with single panel radiators originally fitted for a boiler
Rooms that already feel cooler than others
A living room with two outside walls is a typical example.
With a boiler, it may warm up quickly.
With a heat pump, engineers often find these rooms benefit from a larger or double panel radiator to maintain comfort.
New builds with modern insulation
Flats with naturally lower heat loss
Homes already fitted with double panel radiators
Smaller homes where heat demand is low
A spare bedroom that only needs gentle heating through the day often performs well with the radiators already in place.
A few practical signs can help you understand whether your radiators may struggle with a heat pump.
Rooms that take a long time to warm up
Rooms that drop in temperature quickly
Needing the heating on for longer than expected
Having to boost the system more often
A room-by-room heat loss survey is the correct way to size radiators for a heat pump.
This assessment looks at insulation, room size, window areas and the typical heat demand.
It gives clear, accurate results and avoids guesswork.
Some radiators appear large but produce less heat than expected.
Designer radiators, for example, often have lower heat output compared to standard double panel radiators.
This is why careful sizing is important.
Heat pumps do not use special radiators, but the radiators must be large enough to heat the room at lower temperatures.
Boilers work with smaller radiators because the water is hotter.
Heat pumps rely on a larger surface area to release the same amount of heat.
Double panel radiators have a larger surface area, which allows them to heat rooms effectively at the lower temperatures used by heat pumps.
Slim or narrow radiators can look modern but often release less heat.
Homes switching to heat pumps may need to replace these with radiators that provide more output.
If you want a simple explanation of how radiator sizing affects performance, our heat pump radiators guide explains the key principles in plain language.
Most households only replace a few radiators. It is rare that a full home upgrade is needed.
Living rooms
Open plan areas
Large bedrooms
Rooms with high heat loss
Bathrooms with towel radiators
Hallways
Small bedrooms
Utility rooms
These spaces usually have lower heat demand and may work well without changes.
Costs vary depending on radiator size and the amount of work needed.
Below is a simple guide for homeowners.
Replacing one radiator: £150 to £400
Installing a larger radiator: £200 to £500 including labour
Upgrading several radiators: varies based on room size and number of replacements
Most homes spend far less than a full home replacement.
Three radiators were upgraded. The rest of the home was already suitable.
No radiators needed replacing due to strong insulation and low heat demand.
One large radiator in the main living space was upgraded to keep the room consistently warm.
A hallway with a towel radiator, however, typically stays suitable without changes.
During a survey, an engineer checks your home layout and radiator sizes to understand how well a heat pump will work.
Room size
Insulation levels
Window size
Radiator output
Expected heat loss
This method ensures each room has the heating it needs and avoids cold spots once the heat pump is running.
The engineer compares the radiator’s heat output with the heat demand for that room.
If the output is lower than required, they recommend a suitable replacement.
If the radiator already meets the requirement, it can stay as it is.
Underfloor heating pairs very well with heat pumps because it spreads warmth evenly at low temperatures.
Homes with underfloor heating often need fewer radiator changes or none at all.
A few simple steps can help you understand your home’s needs:
Note any rooms that feel harder to heat in winter
Check whether you already have double panel radiators
Think about rooms that are open plan or have high ceilings
These observations help engineers make accurate recommendations.
Most homes need one or two radiators upgraded, not a full replacement.
A clear room-by-room check remains the best way to understand what your home needs and how to get the most from a heat pump.
If you are comparing models or planning your system, our list of the best air source heat pumps can help you understand which options suit different homes.
iHeat installs heat pumps from leading brands including Worcester Bosch, Vaillant and Alpha.
Our team can explain how radiators affect heat pump performance and what changes may be needed in your home.
We provide clear guidance during the survey process, free online quotes and fast installation across the UK.
If you’d like personalised advice on preparing your home for a heat pump, iHeat can help.
Last updated: 2nd December, 2025
Written by Stephen Day
Gas Safe Engineer at iHeat
Stephen Day is a Gas Safe registered and FGAS certified engineer with over 20 years of hands-on experience in the heating, cooling, and renewable energy industry, specialising in boiler installations, air conditioning, and heat pump systems.
LinkedInArticles by Stephen Day are reviewed by iHeat’s technical team to ensure accuracy and reliability.
02nd December, 2025
Most homes need some radiators upgraded for a heat pump, but usually not all of them.
28th November, 2025
High temperature heat pumps work like boilers without needing radiators, but they cost mor...
14th November, 2025
This guide outlines the best air source heat pumps for UK homes in 2025 and what to know b...
No obligation. Takes less than 60 seconds.